If anyone has any ideas on this and how to do it i would like to sit down with you. my problem is I dont have any tools I can use to do anything with. My shop is full of storage stuff until I build a garage or build another storage unit. So I am unable to do anything myself.
I would be williing to work with you on this. Please help
Vipers look cool at a distant, but be careful of the bite..its a killer!
I have used a "Tap Water Filter" as one in the past. I used a piece of rigid tubing to make a U shape from the inlet hole in the bottom (the u prevented the Kalkwasser from filing/plugging the hole). I drilled the hole in the bottom cap so the rigid tube would just fit in it. I then put it in line with my aqua lifter pump I was using for top off. It was not quite as efficient as a real reactor, but it took about 5 minutes to put together and did fine in a smaller tank that had a fairly heavy sps load.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum