Holyzion wrote:
Good looking set up, i wish i had the funds to put two MP10ws in my RSM! |
I added one at a time and I've fallen in love with the Vortech pumps. IMO they are worth scraping a few thousand pennies together when you can. Even one made a huge difference.
Durff wrote:
Are running your mp10s on reef crest mode without the master/slave setup? And if so how do you like it? |
If I had to pick just one mode it would be reef crest but, I use the Apex to control the pumps and vary the mode and intensity of the flow during the day. One pump is overkill at a 100% but with two I can run them slower and have more variation in water movement.
Below is the schedule I use. I've considered using the sync mode but when I use this on both pumps I seem to get some additional "randomness" to the flow.
Fallback const35 (if link to apex is lost, this is the mode used)
If FeedA 000 Then const10
If FeedD 000 Then OFF
If Time 00:01 to 04:00 Then lago25
If Time 04:00 to 05:01 Then const35
If Time 05:01 to 08:00 Then pulse35
If Time 08:01 to 08:59 Then nutri40
If Time 09:00 to 09:05 Then const10 (auto feeder runs)
If Time 09:06 to 12:00 Then reef35
If Time 12:00 to 12:01 Then const60
If Time 12:01 to 13:59 Then reef75
If Time 14:00 to 14:05 Then const10 (auto feeder runs)
If Time 14:06 to 13:00 Then reef75
If Time 15:00 to 15:01 Then const60
If Time 15:01 to 16:00 Then pulse50
If Time 16:00 to 16:01 Then const60
If Time 16:01 to 16:59 Then reef50
If Time 19:00 to 19:05 Then const10 (auto feeder runs)
If Time 19:06 to 23:59 Then pulse35
If you want to see it, http://fishcam.sparkingwire.com is the video feed I use on the apex dashboard