EMERGENCY FORUM - Small leak on biocube

Print Page | Close Window

Small leak on biocube

Printed From: Utah Reefs
Category: Help
Forum Name: EMERGENCY FORUM
Forum Description: If you have an Emergency post here and you should receive a quick reply.
URL: http://www.utahreefs.com/forum/forum_posts.asp?TID=65492
Printed Date: April 19 2024 at 9:01am
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com

Topic: Small leak on biocube

Posted By: 96slowbra
Subject: Small leak on biocube
Date Posted: July 13 2013 at 9:03pm

There seems to be a small leak on the front of my biocube 29. I wipe it off and one drop runs down the front... What now?

-------------
105 rimless

Replies:

Posted By: reefnfeef
Date Posted: July 13 2013 at 9:04pm

Is the water level too high?

-------------
aaaaaaaaaaaaaannd.... I'm broke

Posted By: 96slowbra
Date Posted: July 13 2013 at 9:06pm

Right where it should be. It seems to be dripping from the inside of the plastic top trim

-------------
105 rimless

Posted By: 96slowbra
Date Posted: July 13 2013 at 9:08pm

Anyone have a little silicon in the clearfield area?

-------------
105 rimless

Posted By: 96slowbra
Date Posted: July 13 2013 at 11:09pm

Can't say thanks enough to nsfw Dave for stopping by tonight and bringing silicon, not only bringing the silicon, I didn't even get my hands wet..

Now I am running just 1 powerhead and a heater until tomorrow night waiting for the silicon to dry. Only have a frogspawn and hammers in the tank along with 2 clowns, 3 baby cardinalfish, and a yellow wrasse.

-------------
105 rimless

Posted By: 96slowbra
Date Posted: July 15 2013 at 9:12am

Filled it back up last night, sends to be leak free

-------------
105 rimless

Posted By: nsfw dave
Date Posted: July 15 2013 at 4:06pm

good to hear

-------------
480 in wall in progress

Posted By: Akira
Date Posted: July 16 2013 at 3:02am

Nice save Dave, Love to see people helping others >

Posted By: yongzheng
Date Posted: July 25 2013 at 12:12am

Right where it should be. It seems to be dripping from the inside of the plastic top trim.

-------------
Saul Forest