led driver for biocube
Printed From: Utah Reefs
Category: Help
Forum Name: EMERGENCY FORUM
Forum Description: If you have an Emergency post here and you should receive a quick reply.
URL: http://www.utahreefs.com/forum/forum_posts.asp?TID=77735
Printed Date: April 23 2024 at 6:25pm
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com
Topic: led driver for biocube
Posted By: beege29
Subject: led driver for biocube
Date Posted: September 28 2015 at 5:54pm
|
Help, my led driver for my 28 gal jbj nano is going out. I have scoured the internet for a replacement but don't know what i need. It has 25 3 watt led bulbs in the standard jbj nano hood. I have it all torn apart and exposed. Is there a generic driver i can buy? Thanks ------------- 90 gallon mixed reef 30 gallon sump |
Replies:
Posted By: beege29
Date Posted: September 28 2015 at 7:05pm
|
Bump ------------- 90 gallon mixed reef 30 gallon sump |
Posted By: beege29
Date Posted: September 28 2015 at 7:05pm
|
36 w driver is what us in there now. Anybody. Please ------------- 90 gallon mixed reef 30 gallon sump |
Posted By: Fatman
Date Posted: September 28 2015 at 8:20pm
| I have a couple of Meanwell ELN 48D drivers, but they need to be outside the hood. You could always put them behind and run wires. The 48Ds go to 48 vdc, and I'm sure they will go down to 36 volts. |
Posted By: Fatman
Date Posted: September 28 2015 at 8:21pm
But then I see you're in Spanish Fork. 
|
Posted By: beege29
Date Posted: September 28 2015 at 8:24pm
|
Where are you at fat? ------------- 90 gallon mixed reef 30 gallon sump |