Kalkwasser
Reactor
Shane Heil,
April 2003
Kalkwasser Reactor in 20
Steps
Step 1
Cut 4” Clear PVC into two pieces - 1 x 6”, 1 x 18”
* You
can use a hack saw with a metal blade to cut the pipe. Try to maintain a clean, straight cut.
Step
2
Using PVC cement attach each of the 4” Clear PVC sections together with the 4” S Coupler PVC
(slip/slip)
*Be
sure to rotate the pipe as you attach the pieces together. This will insure that no axial leak paths are created. Force the sections completely into the coupler.