Kalkwasser
Reactor
Shane Heil,
April 2003
Kalkwasser Reactor in 20
Steps
Step 7
Glue the 4” FIPT Adapter PVC (slip/thread) to the top of
the clear PVC
*Be sure to rotate the pipe as you attach the
adapter. This will insure that
no axial leak paths are created. Force
the pipe completely into the adapter.
Step 8
Glue the 4” S Cap PVC (slip) to the bottom of the clear
PVC
*Be sure to rotate the pipe as you attach the
cap. This will insure that no
axial leak paths are created. Force the
pipe completely into the cap.