Kalkwasser
Reactor
Shane Heil,
April 2003
Kalkwasser Reactor in 20
Steps
Step 11
Attach the 1” Threaded Elbow/ 1” Hose barb to the output
of the MaxiJet 400 powerhead.
*
Smear a generous amount of silicone onto the threads of the elbow. Force the elbow onto the output of the powerhead. Set aside.
Step 12
Thread the ½” Threaded hose barb (1” hose) into the top coupler.
Thread the ½” Threaded hose barb (½ “hose) into the bottom coupler.
* Use
a small amount of silicone on the threads to prevent galling.