Kalkwasser
Reactor
Shane Heil,
April 2003
Kalkwasser Reactor in 20
Steps
Step 14
Install the 4” T
Plug PVC (thread) into the 4” FIPT
Adapter PVC (slip/thread)
* Do
not over-tighten at this point.
Step 15
Attach the 4” Hub Closet Flange ABS to the 4” S Cap PVC (slip) using a generous amount of silicone.
* You
can also use PVC cement, although the Closet Flange is ABS. The silicone will set and securely attach
the pieces.
Step 16
Set the entire assembly aside to dry overnight. This
will insure that the
silicone sets sufficiently.