Neptune Jr. controller
Printed From: Utah Reefs
Category: Main
Forum Name: General Discussion
Forum Description: Posts that don't fit in any of the other categories.
URL: http://www.utahreefs.com/forum/forum_posts.asp?TID=20550
Printed Date: October 17 2025 at 4:16am
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com
Topic: Neptune Jr. controller
Posted By: EagleEyez5
Subject: Neptune Jr. controller
Date Posted: September 17 2007 at 10:43am
|
OK new to the controller thing.......If I get the Neptune Jr. and the dirrect connect 8, does this allow me to do my sunrise and sunset, as well as control my temp by turning my fans on, and heater off{or vice versa}?
Also will this allow me to run my moon lights? I have priced out just buying the digital timers and installing a couple of new outlets{12 total} and am around $130......but this would not control the temp......so I was thinking of adding another temp control for another $120...... If anyone has used their neptune controller for what I have described, let me know how you like it.... ------------- http://www.highendcorals.com/"> 
WMAS PAID SPONSOR |
Replies:
Posted By: bbeck4x4
Date Posted: September 17 2007 at 10:55am
|
yes, the aqua jr can do all of the above, the moonlight is
"technically" not there but if you were to plug a incandescent light
into outlet #6 it can be done, (this is what I am doing) or neptune now
sells a module that can do it, you can also control based on ph, one
suggestion is to make sure that you get the serial port option then you
can program it via a pc. the learning curve is easier if you can see
the program all at the same time. also as your needs change your programming can change, this is the greatest thing about getting the neptune, IMO ------------- Family Portraits /Google trusted Photographer for Google Maps for Businesses |
Posted By: EagleEyez5
Date Posted: September 17 2007 at 10:57am
|
Thank you for the reply.....I figured I am dropping an arm and part of a leg on the new setup, so why not just go all out....... ------------- http://www.highendcorals.com/">
WMAS PAID SPONSOR |
Posted By: Mike Savage
Date Posted: September 17 2007 at 11:32am
|
Yes it does all of that as well as moon phases which is what Brian is talking about. Make sure to get the serial port option. Bruce at Ewaldsreef has these http://www.ewaldsreef.com/shop/product_info.php?products_id=146&osCsid=55561b5a62b092dd830f99da762b3158 - http://www.ewaldsreef.com/shop/product_info.php?products_id=146&osCsid=55561b5a62b092dd830f99da762b3158 Mike-------------  |
Posted By: bbeck4x4
Date Posted: September 17 2007 at 11:32am
|
it's #8 not #6 that was a typo
------------- Family Portraits /Google trusted Photographer for Google Maps for Businesses |
Posted By: jpiotrowski
Date Posted: September 17 2007 at 11:40am
| Also, with the serial port you can monitor the tank conditions, hours, weeks months. If I would have had this on mine I would have (possibly) seen the increase in tank temp. |
Posted By: EagleEyez5
Date Posted: September 17 2007 at 12:56pm
|
Can you monitor with the Jr?......from what I have looked, I thought it was only with the pro, and III... ------------- http://www.highendcorals.com/">
WMAS PAID SPONSOR |
Posted By: jpiotrowski
Date Posted: September 17 2007 at 2:53pm
|
It is a bit confusing but if you are planning on getting the RS-232 cable and planning on running to a pc then you would buy the aquanotes software which both runs the x10 controlers (through the neptune) and monitors the parameters (again through the neptunes ram), though you don't need to run through the pc. I am not an expert on this so, I would talk to someone more familiar with the jr model. According to the picture I don't see a port for pc interface. I found the following on the Nepute website...
If the AquaControllerJr is purchased with the optional serial port it can be connected to PC via a standard RS-232 cable (available from Neptune Systems). The serial interface allows you to download the datalog log as well as retrieve the current status of the monitored parameters and controlled devices in the aquarium. A computer is NOT required to program or operate the AquaController Jr.
|
Posted By: Mike Savage
Date Posted: September 17 2007 at 3:28pm
|
If you have the serial port you can use the "AquaNotes Lite" software which is free.
Mike ------------- |
Posted By: jpiotrowski
Date Posted: September 17 2007 at 3:54pm
| What does the lite version have? |
Posted By: bbeck4x4
Date Posted: September 17 2007 at 5:07pm
|
you can download it now from their site, to just check it out, it will make more sense once you have the jr hooked up to it, also their service and support is top notch, I personally had the (I think he is the owner?)spend three hours on the phone with me going over stuff to check out why my temp probe was acting up, in the end he sent me a new temp probe, no charge, it never has had a problem since, and I am going on two years with it, there are others out there, I researched them all, and went with the name brand, have never regretted it, in fact I need to put one on the wifes nano at work. ------------- Family Portraits /Google trusted Photographer for Google Maps for Businesses |
Posted By: Mike Savage
Date Posted: September 17 2007 at 5:44pm
|
Here is a comparison of AquaNotes and AquaNotes Lite.
http://www.neptunesys.com/aquaNotes.htm#COMPARISON - http://www.neptunesys.com/aquaNotes.htm#COMPARISON
Mike ------------- |
Posted By: Dion Richins
Date Posted: September 17 2007 at 10:48pm
|
I talked to Curt (president of Neptune) on Saturday. We have a problem getting our pro3 onto the internet. He was very accommodating with us. After 10-15 minutes he had the problem figured out and we had a plan of action. It was nice to talk to the owner of a company face to face and have him work out a problem like that. ------------- http://www.customaquariumfurniture.com" rel="nofollow - Bad "censored" Cabinets Best quality in the valley! He is one sexy bald guy, even with out a finger!(MAC) |
Posted By: Mike Savage
Date Posted: September 17 2007 at 11:47pm
|
Curt is also active and very helpful on the Neptune Systems forum on RC. He goes by CLP.
Mike ------------- |
Posted By: bbeck4x4
Date Posted: September 17 2007 at 11:47pm
Curt, yup, that was the guy, real nice guy, service and support wins every day in my book.
------------- Family Portraits /Google trusted Photographer for Google Maps for Businesses |