Print Page | Close Window

TDS Creep? Huh?

Printed From: Utah Reefs
Category: Specialized Discussion
Forum Name: Equipment
Forum Description: This is the place to ask question about reef equipment.
URL: http://www.utahreefs.com/forum/forum_posts.asp?TID=14690
Printed Date: July 25 2025 at 6:51am
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: TDS Creep? Huh?
Posted By: Corey Price
Subject: TDS Creep? Huh?
Date Posted: October 18 2006 at 2:05pm
I tested my RO water out of the storage tank and found it to read 90 ppm on Mark's TDS meter (thanks Mark).  For reference, my tap water is 330 ppm.  I thought that this must be one reason behind the out-of-control algae that has been bothering my tank.  Well, after further study and a call to Air, Water, & Ice ( http://www.airwaterice.com - www.airwaterice.com ) where I purchased the unit, I have found that my RO water may be suffering from "TDS creep".  This is what I've found out:
 
1.  TDS creep is a common problem with RO units that have frequent, short-duration on cycles.  Apparently reverse osmosis membranes do not produce high-quality water when there isn't a lot of water passing over the membrane.  For example, hooking the RO line or storage reservoir line directly to the sump will result in short cycles w/ poor quality product water.
2.  TDS creep and low output can be caused also by low water pressure in the RO unit.  For example, a system running at 35 psi (dynamic pressure) just before the waste line restrictor is much less efficient than if the pressure is above 50 psi (dynamic).  (I can't imagine whose problem this is also...Embarrassed)  There will be some head (pressure) loss between the line in and the restrictor, but usually not more than 5 psi.
 
Some of the possible solutions include:
 
1.  Use a RO top-off storage reservoir and fill it less frequently, activating the RO unit for longer periods. 
2.  Use anti-TDS-creep devices that allow a reservoir to fill in one drawn-out cycle instead of short cycles.  The unit can be totally DIY.
3.  Use a "permeate" pump.  Such a pump can be purchased readily, uses no electricity, and boosts RO product water to waste water ratios to more than the abysmal 1:5 ratio.
 
The TDS creep in systems can be quite noticeable, (like mine) but it doesn't necessarily mean that the membrane is toast.
 
So all you out there that know this already, great.  I'm just hoping to pass some info along for those of us who don't know this.  I think it's logical, but many times I just assume that the water from the RO filter is great w/o really knowing that it's great (or not). 
 
Please help me add to this post if you have more info.Smile
 



Replies:
Posted By: Corey Price
Date Posted: October 18 2006 at 6:42pm
So how does one test for TDS creep?  Simple:  Let the RO filter run for an extended period of time.  Test water at startup and then after it has run for a while.  In my case,  test the water out of the drinking water storage tank, empty the tank, and test when the tank has filled back up.  If you get 80 ppm before emptying and 15 ppm after, you know you have a problem with TDS creep.


Posted By: jfinch
Date Posted: October 18 2006 at 7:35pm
Which is one of the reasons why I use the "pump up" auto top-off system that I use.  http://www.utahreefs.com/forum/forum_posts.asp?TID=1770 - http://www.utahreefs.com/forum/forum_posts.asp?TID=1770

-------------
Jon

https://www.youtube.com/channel/UC6y_EzjI_ljbIwf2n5uNzTw" rel="nofollow - What I've been doing...



Posted By: Shane H
Date Posted: October 18 2006 at 9:37pm
Corey,
Thanks for posting this. I think many people may have this problem and not even know it. I have a habit of testing my tds once a month. It is one of those things that "creeps" up so slowly that it can be easily overlooked!
 
 


Posted By: Mike Savage
Date Posted: October 18 2006 at 11:00pm
Corey, great info, thanks!

-------------




Posted By: Aquarium Creations
Date Posted: October 19 2006 at 10:30am

hmmm kinda weird, i test our R/O water at the store every week and we are around .003-.005 very interesting info..



-------------
Aquarium Maintenance,Consulting,Custom Built Glass Aquariums
Rimless/Euro,24Hr Emergency Service 8015485201
Www.UtahAquariumDoctors.com
[email protected]



Posted By: Corey Price
Date Posted: October 19 2006 at 1:40pm
My RO filter is directly connected to the sump top-off.  So my thoughts to help this situation are to get an electric solenoid valve, put it in the line from the house water to the RO filter, and turn it on at night using a timer.  The storage tank that's mainly for drinking water would be plumbed with a one-way valve to prevent it from draining into the sump, but still allow it to be used for drinking water.  The sump could be then topped off from a reservoir, allowing me to dose kalkwasser directly.
 
The whole system would be filled nightly during a two to three hour time.  The solenoid would prevent the RO filter from turning on otherwise. 
 
What do you think?
 


Posted By: GARFVolunteer
Date Posted: October 19 2006 at 6:27pm
Here is a link to a top-off system I would like to build some time.  http://reefcentral.com/forums/showthread.php?s=&threadid=275455 - http://reefcentral.com/forums/showthread.php?s=&threadid=275455 It is kind of a mechanical version of Jon's and was designed to reduce the effects of "TDS Creep".
 
I just need to get the planning and zoning committee (also known as the lovely and gracious Monica) to approve it.
 
Thanks,
 
Scott


-------------
President Idaho Marine Aquarium Society
A fair and biased reef hobbyist
"How do you make poor people rich by making rich people poor" Rush Limbaugh on Obama taxes


Posted By: Corey Price
Date Posted: October 20 2006 at 8:49am
Very interesting, Scott. 


Posted By: Mark Peterson
Date Posted: October 21 2006 at 5:50am
I believe it has a lot to do with the quality of the membrane.
 
I also believe that a well designed and brightly lighted RDP Refugium actually resolves the problem. The TDS on the water coming out of a Kold-Steril water purification unit is attrocious, yet the one which feeds water to a certain 180 gal tank that I know of, seems completely flawless.
 
Be careful not to make more of this than it really is. Wink
A little extra stuff in the water is only one of five reasons for undesirable algae growth.


-------------
Reefkeeping Tips, & quick, easy setup tricks:
www.utahreefs.com/forum/forum_posts.asp?TID=9244
Pay it forward - become a paid WMAS member


Posted By: Adam Blundell
Date Posted: October 23 2006 at 8:47am
I agree with Mark.  Look at all the great tanks out there run with tap water.  What are you worrying about?
Adam


-------------
Come to a meeting, they�re fun!


Posted By: Corey Price
Date Posted: October 23 2006 at 1:23pm
Well, I've never been one to use unscientific methods such as the Blundell "finger-in-the-water" salinity test, and I'd like to get a handle on my algae problem. 
However, I don't think testing any trace element regularly is very fruitful at all, so you got me there, Adam.  Just calcium and alk for me.  A wet thumb in the air is an okay decision-maker on many things for me.

My thoughts are if you're running RO, you should be getting better to really great filtered water, not just mediocre filtered water.  I'm not interested in distilled ultra-pure water, so I do realize it's all in your point-of-view.  Also, different municipalities will have different water quality.  I have clear filter housings, and you should see my sediment filter- it was white, and after 6 months, it has turned completely brownish-black.  Yuck.

 


Posted By: GARFVolunteer
Date Posted: October 23 2006 at 5:24pm
Originally posted by Adam Blundell Adam Blundell wrote:

I agree with Mark.  Look at all the great tanks out there run with tap water.  What are you worrying about?
Adam
 
Not all tap water is the same...  Implying it is, is kind of like saying all anemone fishes are clown fishes.Smile
 
  GARF has great tap water but their source comes from an area where there is no farming up stream so the chances of nitrates and phosphates are lower.
 
I use to have a 1 in 4 chance of having good tap water since my water use to come from 4 different wells.  It still does come from 4 wells but there is a huge storage tank that they all dump into.  My water tests high in silicates and phosphates.  I am surrounded by farm land that has been turned into subdivisions.
 
Tap water at Cascade Raft & kayak had 40ppm nitrates last summer and all drinking water is RO.  However this summer, the nitrates were undetectable.  The thought is with all the rain we had this spring the nitrates were flushed away.
 
The person that got me interested in the hobby has, a well in the middle of farm land but his tests low for phosphates, silicates and nitrates.  He does not use an RO unit.
 
Thanks,
 
Scott
 
 


-------------
President Idaho Marine Aquarium Society
A fair and biased reef hobbyist
"How do you make poor people rich by making rich people poor" Rush Limbaugh on Obama taxes



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net