SLC Starphire Glass Retailers
Printed From: Utah Reefs
Category: Main
Forum Name: General Discussion
Forum Description: Posts that don't fit in any of the other categories.
URL: http://www.utahreefs.com/forum/forum_posts.asp?TID=47859
Printed Date: July 11 2026 at 8:28pm
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com
Topic: SLC Starphire Glass Retailers
Posted By: Kirklan
Subject: SLC Starphire Glass Retailers
Date Posted: March 28 2011 at 9:29pm
|
Hi everyone. I have been out of the hobby for a few years now since my move from SLC to SE ID. I am looking to get back into the hobby and am trying to put together a custom tank. I'll be in SLC on Thursday or Friday and was wondering if there is a good supplier of starphire glass that I can get cut to size while I'm down there. Any help would be appreciated. Kirklan ------------- SE Idaho 67G Rimless Reef |
Replies:
Posted By: Kirklan
Date Posted: March 28 2011 at 9:46pm
|
P.S. I'm also looking for some acrylic to create the overflow and partitions in a DIY sump. ------------- SE Idaho 67G Rimless Reef |
Posted By: Josh95
Date Posted: March 28 2011 at 9:58pm
|
Go to regional supply for the acrylic. Not sure on the starphire glass
|
Posted By: Kirklan
Date Posted: March 28 2011 at 10:09pm
|
Thanks Josh! ------------- SE Idaho 67G Rimless Reef |
Posted By: tcfab
Date Posted: March 28 2011 at 10:33pm
|
Kellys stain glass in Ogden has 1/2" starphire they are selling pretty cheap, they are trying to cut there inventory on it I would give them a call. Also for acrylic go to Delvies Plastics in SLC, they are a lot cheaper then Regional for the same brand of acrylic. ------------- Need custom acrylic work? give me a call, www.Elite-Aquatics.net (801)645-6386 |
Posted By: Josh95
Date Posted: March 28 2011 at 10:35pm
|
TC, i think your off there, delivies is more expencive then regional supply. (shrugs shoulders questioningly)
|
Posted By: tcfab
Date Posted: March 28 2011 at 10:38pm
|
Everytime I call to get pricing from them they are double the price on cell cast then everybody else I do business with. Are you pricing extruded or cast? Cast is a bit more then extruded ------------- Need custom acrylic work? give me a call, www.Elite-Aquatics.net (801)645-6386 |
Posted By: badfinger
Date Posted: March 28 2011 at 10:39pm
| For scraps, it may be cheaper to go to regional... they sell it by the pound and I think delvies still charges a foot price. In fact I have been into regional and if I am just getting 1 or 2 pieces they just say, take it... but if you are looking for sheets, tyler knows best, delvies |
Posted By: tcfab
Date Posted: March 28 2011 at 10:47pm
Yes, if you are buying from their scrap bin then yeah it is cheaper. You are buying it by the scrape price. Also getting it from their bin you don't know if its cast or extruded. Extruded does not machine well. I have done tons of pricing from every vendor here in Utah and I can tell you who has the best pricing. I buy all my sheets form Professional Plastics in Ogden, they beat everybody on price for full sheets. Delvies has great prices on smaller pieces, not everybody does that so it is nice when you only need a small piece. Delvies also has the best pricing on acrylic tube (cast and extruded) then anybody on the internet that I have found.
------------- Need custom acrylic work? give me a call, www.Elite-Aquatics.net (801)645-6386 |
Posted By: CapnMorgan
Date Posted: March 28 2011 at 10:54pm
|
Delvies has always been the cheapest when I am buying acrylic for tanks. ------------- Steve http://utahreefs.com/forum/forum_posts.asp?TID=40637&PID=356246" rel="nofollow - My Old 180G Mixed Reef Currently: 120G Wavefront Mixed 29G Seahorse & Softies Running ReefAngel Plus x2 435-8 |
Posted By: Nikolai
Date Posted: March 28 2011 at 11:13pm
| TCFab has definitely bought his fair share of acrylic..... Also he is not the only person that has said that regional is more expensive. |
Posted By: Kirklan
Date Posted: March 29 2011 at 12:02pm
|
tcfab - Thanks for the heads up. I just ordered the glass cut for a 36X24X18 tank. I'm looking forward to having the tank build up and running. ------------- SE Idaho 67G Rimless Reef |
Posted By: tcfab
Date Posted: March 29 2011 at 12:18pm
|
Did you have them flat polish the edges? They do amazing work. ------------- Need custom acrylic work? give me a call, www.Elite-Aquatics.net (801)645-6386 |
Posted By: Kirklan
Date Posted: March 29 2011 at 10:14pm
|
I did have them do a flat polish on the edges. I made a stupid mistake though in accidentily purchasing all panels as starphire rather than just the front and sides. Next question - does anyone know where I can get a 1-1/2" and 1-3/4" holes drilled while I'm down in SLC? tcfab - do you know if Kelly's will drill the holes? ------------- SE Idaho 67G Rimless Reef |
Posted By: Kirklan
Date Posted: March 29 2011 at 10:26pm
|
Also, what size and type of acrylic would everyone recommend for overflows and baffles in the sump? I was just going to do the 1/4" black acrylic for the overflow and 1/4" clear for the baffles in the sump. ------------- SE Idaho 67G Rimless Reef |
Posted By: tcfab
Date Posted: March 29 2011 at 10:51pm
Kelly's is actually selling their starphire for the same as their normal glass right now, so I would have gotten all starphire too  You will love their work it is top notch. I am not sure if they drill holes or not, you might want to ask them. 1/4" acrylic will be fine for your overflow and sump baffles.------------- Need custom acrylic work? give me a call, www.Elite-Aquatics.net (801)645-6386 |
Posted By: Kirklan
Date Posted: March 29 2011 at 10:55pm
|
Thanks tcfab, I appreciate your help. ------------- SE Idaho 67G Rimless Reef |
Posted By: tcfab
Date Posted: March 29 2011 at 10:57pm
No Problem.  ------------- Need custom acrylic work? give me a call, www.Elite-Aquatics.net (801)645-6386 |
Posted By: superchud
Date Posted: March 30 2011 at 1:00pm
| what did you pay per sq ft? |
Posted By: tcfab
Date Posted: March 30 2011 at 1:16pm
|
I am pretty sure it was $10 a sf ------------- Need custom acrylic work? give me a call, www.Elite-Aquatics.net (801)645-6386 |
Posted By: superchud
Date Posted: March 30 2011 at 1:24pm
| wow if it was 10 ft2 they are trying to dump it |
Posted By: tcfab
Date Posted: March 30 2011 at 1:33pm
|
Yeah its a steal ------------- Need custom acrylic work? give me a call, www.Elite-Aquatics.net (801)645-6386 |
Posted By: Reefboy4life
Date Posted: March 30 2011 at 2:23pm
|
Kelleys will also drill. ------------- 90 gallon mixed reef |